Product Description
MINERAL BALL MILL MACHINE INTRODUCTION
A Ball Mill is a type of grinder used to grind materials into an extremely fine powder mainly for use in the mineral processing industry. Ball Mills can grind various ores and other materials either wet or dry, depending on requirements. Ball Mills consist of a large cylinder which slowly rotates around a horizontal axis. The cylinder is partially filled with the material to be ground plus the grinding medium (metal grinding balls). Inside the cylinder, the medium will be lifted to a certain height under the action of centrifugal force and then drop or fall, grinding the ore in between the balls as they interact. Feed material to be ground enters the cylinder via a hopper on one end and after being crushed by the grinding medium is discharged at the other end.
THE STRUCTURAL CHARACTERISTICS OF MINERAL BALL MILL MACHINE
The mill is composed of feeding device, discharge device, rotation device ,speed reducer, small transmission gears, motor, and electric control part. The Hollow Shaft is made of cast iron, the inner plates can be changed, the large rotating gears are manufactured by the casting process, and inside the cylinder is equipped the wear-resistant plates, it has good abrasion resistance. The machine is running smoothly, it works reliably.
Kinds of Grinding Balls for the Ball Mill:
Portable Ball Mill /Ball Grinder Mill Parameters for reference:
| Model |
Shell rotation speed(r/min) |
Ball load |
Feeding size |
Discharging size |
Capacity |
Motor power |
Weight |
| (t) |
(mm) |
(mm) |
(t/h) |
(kw) |
(t) |
| Ø 900*1800 |
36-38 |
1.5 |
< =20 |
0.075-0.89 |
0.65-2 |
18.5 |
4.6 |
| Ø 900*3000 |
36 |
2.7 |
< =20 |
0.075-0.89 |
1.1-3.5 |
22 |
5.6 |
| Ø 1200*2400 |
36 |
3 |
< =25 |
0.075-0.6 |
1.5-4.8 |
30 |
12 |
| Ø 1200*3000 |
36 |
3.5 |
< =25 |
0.074-0.4 |
1.6-5 |
37 |
12.8 |
| Ø 1200*4500 |
32.4 |
5 |
< =25 |
0.074-0.4 |
1.6-5.8 |
55 |
13.8 |
| Ø 1500*3000 |
29.7 |
7.5 |
< =25 |
0.074-0.4 |
2.0-5.0 |
75 |
15.6 |
| Ø 1500*4500 |
27 |
11 |
< =25 |
0.074-0.4 |
3.0-5.0 |
110 |
21 |
| Ø 1500*5700 |
28 |
12 |
< =25 |
0.074-0.4 |
3.5-6 |
130 |
24.7 |
| Ø 1830*3000 |
25.4 |
11 |
< =25 |
0.074-0.4 |
4.0-10.0 |
130 |
28 |
| Ø 1830*4500 |
25.4 |
15 |
< =25 |
0.074-0.4 |
4.5-12 |
155 |
32 |
| Ø 1830*6400 |
24.1 |
21 |
< =25 |
0.074-0.4 |
6.5-15 |
210 |
34 |
| Ø 1830*7000 |
24.1 |
23 |
< =25 |
0.074-0.4 |
7.5-17 |
245 |
36 |
| Ø 2100*3000 |
23.7 |
15 |
< =25 |
0.074-0.4 |
6.5-36 |
155 |
34 |
| Ø 2100*4500 |
23.7 |
24 |
< =25 |
0.074-0.4 |
8-43 |
245 |
42 |
| Ø 2100*7000 |
23.7 |
26 |
< =25 |
0.074-0.4 |
8-48 |
280 |
50 |
| Ø 2200*4500 |
21.5 |
27 |
< =25 |
0.074-0.4 |
9-45 |
280 |
48.5 |
| Ø 2200*6500 |
21.7 |
35 |
< =25 |
0.074-0.4 |
14-26 |
380 |
52.8 |
| Ø 2200*7000 |
21.7 |
35 |
< =25 |
0.074-0.4 |
15-28 |
380 |
54 |
| Ø 2200*7500 |
21.7 |
35 |
< =25 |
0.074-0.4 |
15-30 |
380 |
56 |
| Ø 2400*3000 |
21 |
23 |
< =25 |
0.074-0.4 |
7-50 |
245 |
54 |
Customer Mine Site
BALL MILL ALLPICATION
JXSC insist the Management principle of treat customer as God, satisfy all kinds of equipment requirements from customers, supply
speedy and efficient sales and after-sales services, and let customers enjoy excellent service in whole cooperation. Except for
manufacturing of the mining equipment, JXSC also can provide engineering consultation, mineral processing experiments, mine
design, installation and commissioning, personal training, track service, management of dressing plant, etc one package service.
Make customer worriless whole-process, shorten construction period and get profit earlier.
SUDAN 20TPH ROCK GOLD PROCESSING PLANT
Process: Our factory JXSC built a complete 20TPH Rock Gold Processing Plants for one of our Sudan client.
The process flowchart is : Crushing --> Screening --> Grinding --> Concentration.
Description:
The whole plant consist of 1 set Vibrating feeder, 1 set swing feeder, 1 set Jaw crusher, 1 set Cone crusher, 1 set Vibrating
screen, 1 set Ball mill, 1 set Spiral Classifier, 4 sets Conveyor belt, 2 sets Sand pump, 1 set Water pump, 20 sets Classifier
box, 30 sets Shaking tables, also include water pipes, interconnecting part for machines, electric cabinets and other supporting accessories.
--
Process of Crushing & Screening & Grinding:
Firstly, the rock gold bearing ore will be crushed by Coarse jaw crusher, then feed to Cone crusher, cone crusher is second
section as fine crushing process, after this step, the output will feed to vibrating screen separate out bigger particles and
smaller particles, big particles (+25mm) return back to Cone crusher for re-crushing, 0-25mm particles go to ball mill to grind super fine size(0.074-0.4mm).
--
Process of Concentration:
after grinding, the concentration equipment we used is Shaking Tables, which divide into two groups, 20 sets for 1st group, 10 sets for 2nd group for re-concentration.
ShakingTable enjoys very high, up to 95% high recovery ratio for fine size free gold.
Packing and Delivery
Ways of Packing:
1. Standard parts packed in the wooden cases.
2. Big parts packed by plastic membrane.
3. The whole machine is loaded in the container
Transportation:
1. By sea or by air freight.
2. MSK/MSC/APL/EMC/WANHAI/KLINE
3. We will remind you before boat arrival
FAQ
1.How is the quality of your products?(mining equipment/machine)
Answer: Our products are manufactured strictly according to national and international standard, and we will take a test on every grinder before delivery.
2.How about your guaranteed?
Answer: All of our products are guaranteed for one year. If products quality is not consistent with the description as we described or the promise before you place order, we promise 100% refund.
3.How about price?
Answer: For the complete same machine, we can promise our quality is the best when the price same as other competitors, and our price can be lowest when the quality at standard level.
4.Service and Payment Terms?
Answer: We can accept T/T and L/C; 40% deposit, 60% balance before delivery, which is international trade practice; Finished product pictures will provide to customers before delivery.
Contact US
If you are interested in our products, please don't hesitate to contact us. You can tell me the following questions, so that we can send you accurate quotation soon, including extra discounts!
1. Which machine do you need? like gold washing machine, spiral chute, vibrating screen, jig separator, shaking table, stone crusher, jaw crusher, impact crusher, etc. EPC service also available.
2. What is your raw material plan to process? like gold ore, diamond ore, tantalite ore, chrome, silica sand, tantalum niobium, tin, titanium, tungsten, coltan, manganese, ziron, rutile, monazite or iron ore, etc.
3. The capacity you need? Like 100 tons per hour or 2000 tons per day.
4. Your contact information? Both Email and phone number are essential, we can contact you easier.
){kind=link}