Laboratory Cyclone Separator PU Cyclone Polyurethane Hydrocyclone

Product Description

Product Description

Hydrocyclone is used for separating and removing heavy mud and sand of coarse particles and sometimes for dehydration of slurry. The Hydrocyclone separator has two types of pressure type and gravity type made up of either cylindrical structure or metal pipe. Slurry is fed through the top of the structure (or metal pipe) by means of pressure or gravity along the tangent line. Coarse and thick particulate matters are thrown to the wall, rotated down and discharged together with the concentrated liquid formed under the action of centrifugal force. Small particulate matters are discharged together with secondary upward vortex after rotated to some extent.

Hydrocyclone / cyclone filter is mainly used for classification, separation, concentration and desliming in the mineral mining industry. When the hydrocyclone is used as a classifier, it is mainly used to form a grinding and classification system with a mill; when it is used as a deslimer, it can be used for desliming in a gravity concentrator; when it is used as a concentrating and dewatering device, it can be used to concentrate ore dressing tailings and send them to fill underground mining tunnels. The hydrocyclone sand separator has no moving parts, simple structure, large capacity per unit volume, small area, high classification efficiency (up to 80% ~ 90%), fine classification granularity, low cost, and low material consumption.

Material

Three different material types for choices: 1). All casted polyurethane (PU) 2), All casted carbon steel lined with PU. 3), All casted carbon steel lined with ceramic.

Material Features

adopt the high quality polyurethane, the shore hardness is 75-85. Very high strength, high abrasion resistance and is extremely resistant to oil. good resilience and aging resistance.

Applications

1.Closed circuit grading, desliming 2.Mineral Classification 3.Concentrate or Tailing Thickening, Dewatering 4.Tailing damming and filling cyclone also can be used for pre-selection or rough selection of ore.

 

Model name	Diameter(mm)	Inlet Pressure(mpa)	Capacity(m³/h)	Cut Size(pm)
FX840	840	0.04-0.15	500-900	74-350
FX710	710	0.04-0.15	400-550	74-250
FX660	660	0.04-0.15	260-450	74-220
FX610	610	0.04-0.15	200-300	74-200
FX500	500	0.04-0.2	140-240	74-200
FX400	400	0.06-0.2	100-170	74-150
FX350	350	0.06-0.2	70-160	50-150
FX300	300	0.06-0.2	45-90	50-150
FX250	250	0.06-0.3	40-80	40-100
FX200	200	0.06-0.3	25-40	40-100
FX150	150	0.08-0.3	14-35	20-74
FX125	125	0.1-0.3	8-20	25-50
FX100	100	0.1-0.3	8-20	20-50
FX75	75	0.1-0.4	1-10	10-40
FX50	50	0.1-0.4	2-5	7-40
FX25	25	0.1-0.6	0.3-1	5-20
FX10	10	0.1-0.6	0.05-0.1	1-5

working principle.
The working principle of the cyclone is mainly centrifugal sedimentation. When the two-phase (or three-phase) mixture to be separated enters the cyclone at a certain pressure from the feeding port of the cyclone, a strong three-dimensional elliptical strong rotating shear is generated. Cut turbulent motion. Due to the different density of the particles, the centrifugal force, centripetal buoyancy, and fluid drag force are different. Due to centrifugal sedimentation, most of the coarse particles (or heavy phases) are discharged through the swirler bottom outlet, and most of the fine particles ( Or light phase) discharged from the overflow pipe to achieve separation and classification.


 

Ways Of Packing

1.Small parts packed in the wooden cases

2.Big parts packed by plastic membrane

3.The whole big machine is loaded in the container

Company Profile

 

Jiangxi Province County Mining Machinery Factory is a leading mining machinery manufacturer with over 30 years experiences,providing complete set processing equipments for Gold ore /Tin ore /Tungsten ore /Iron ore /Diamond/ Coltan ore /Silica sand /Zircon sand/ Black sand/Chrome ore/Cobalt ore/Antimony ore, ect. As well as complete set small laboratory mining machines.

 

7*24 hours online consulting service, we provide you with the prophase plan, process flow design and
manufacturer equipment according to your special demand.

Send technicians to the job site guiding the installation and adjustment, training operators and finishing the check and accept together with you.

 

FAQ

Pre-sales service: We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.

Sales service: Send technicians to the site to guide the installation and commissioning, train the operators, and complete the acceptance with you.

After-sales service: To establish long term friendship, we will regularly pay return visit to customers. Supplying technique, building design, instruction, installation and debugging for free.


Lifelong service: One year warranty to make sure your machine runs constantly.Always offer lifelong service and provide spare parts for a long term.

How is the quality of your products?
Answer: Our products are manufactured strictly according to national and international standard, and we will take a test on every grinder before delivery.

How about the Guaranteed?
Answer: All of our products are guaranteed for one year. If products quality is not consistent with the description as we described or the promise before you place order, we promise 100% refund.

How about price?
Answer: For the complete same machine, we can promise our quality is the best when the price same as other competitors, and our price can be lowest when the quality at standard level.

How about the service and payment terms?
Answer: We can accept T/T or other payment ways you request; 30% deposit, 70% balance before delivery, which is international trade practice; Finished product pictures will provide to customers before delivery.